Talc powder pastic filler materbatch, plastic filler masterbatch

1.Talc powder filler materbatch 2.as the LLDPE/PP/HDPE the carrier 3.specialized in manufacturing kinds of filler masterbatch

Talc powder filler plastic masterbatch 

Physical Properties: 

Index	Value	Unit	Test Standard
Appearance	Gray translucency cylinders particle	- - - -	- - - -
MFI         (190°C,10KG)	10 ± 4		GB3682-2000
Density	1.7± 0.2	g/cm	GB1033-86
Volatile content          (190°C,3hrs)	<0.15	%	- - - -
Particle count	400~500	pieces / 10g	Gaia standard
Mineral content	80±1	%	QB-1126

[ Above are values for reference, actual values may vary slightly due to instruments’ differences, measurement bias and normal production fluctuation ]

Usage:

 H-1 talc filler masterbatch, its refraction index is 1.48-1.59, conform to the refraction index of PP & PE resin. So control its additive ratio in the range of 5%-30%,   H-1 talc filler masterbatch will not affect base resin's transparent property. The film which add  H-1 talc filler masterbatch is similar as PE pure film.( film thickness is about 0.01mm-0.02mm)

Suggested Additive Ratio:

5%-20%  H-1

Product Property:

1) Bigger additive ratio will cut cost obviously.

2) Smaller affect to product's transparent.

3) Green, talc filler  masterbatch additives don't contain any poison like as asbestos, it has SGS testing report.

4) Better fluidity and better process property , customer don’t need to change equipment and processing technique.

Package, Transportations and Storage:

1) PE heavy-duty bag , 25kg / bag.

2) Transportation according to non-dangerous goods. Note to avoid moisture,insolation and breakage.

3) The product is sensitive to moisture. No problem to store in original packing bags. Make sure to use the product immediately after open the packing bags. If it has moisture problem, Dry it by hot air recycle machine under 90°C for 60 minutes.

Masterbatch Application: 

Talc powder pastic filler materbatch, plastic filler masterbatch